If you have a Windows 10 computer and you can’t connect to the VPN after a restart, there are a few things you can try to fix the issue. First, make sure that your VPN software is up to date. If it’s not, update it and try again. If that doesn’t work, try restarting your computer and then connecting to the VPN. If that doesn’t work, try resetting your Windows 10 networking settings. To do that, go to Start > Settings > Network & Internet > Status > Network reset. Click the “Reset now” button and follow the instructions. Finally, if none of that works, you can try manually configuring your VPN connection.
Table of Contents
How to Fix Windows VPN Connecting Only after a Restart
Why Does This Happen?
There are a few reasons why your Windows VPN might only connect after a restart. The most common reason is that your VPN client isn’t configured to start automatically when your computer starts up. This means that your VPN client won’t try to connect to the VPN server until you manually launch it.
Another possible reason is that your VPN client is configured to use a different DNS server than your regular network connection. This can cause problems when trying to connect to websites or other resources on the internet. Changing your DNS server settings to match those of your VPN can often fix this problem.
Finally, it’s possible that your firewall or antivirus software is blocking the VPN connection. This is usually because the firewall is configured to block all incoming connections that are not explicitly allowed. To fix this, you’ll need to add an exception for the VPN connection in your firewall settings.
How to Fix It
If you’re having trouble connecting to a Windows VPN, there are a few things you can try to troubleshoot the issue.
First, make sure that your VPN client is up to date. If you’re using the built-in Windows VPN client, you can check for updates by opening the Settings app and going to Update & Security > Windows Update. If there are any updates available, install them and try connecting to your VPN again.
If that doesn’t work, try resetting your network adapter. To do this, open the Control Panel and go to Network and Sharing Center > Change adapter settings. Right-click on your network adapter and select Disable. Wait a few seconds and then re-enable the adapter. Try connecting to your VPN again.
If you’re still having trouble, you can try resetting your Winsock settings. This is a bit more technical, so if you’re not comfortable doing it, you can try contacting your VPN provider for support. To reset your Winsock settings, open the Command Prompt and type the following commands:
netsh winsock reset
netsh int ip reset
Reboot your computer and try connecting to your VPN again.
Resources
If you’re having trouble connecting to a Windows VPN, there are a few things you can do to fix the problem.
First, check your VPN settings to make sure they’re correct. If you’re using the wrong server address or authentication method, you won’t be able to connect.
If your settings are correct, the next step is to flush your DNS cache. This will clear any old DNS entries that might be causing problems. To flush your DNS cache, open the Command Prompt and type “ipconfig /flushdns”.
If you’re still having trouble, the next step is to reset your TCP/IP stack. This will reset all your network settings and hopefully fix any VPN connection problems you’re having. To reset your TCP/IP stack, open the Command Prompt and type “netsh int ip reset”.
If you’re still having trouble after trying all of these steps, the problem might be with your firewall or antivirus software. These programs can sometimes block VPN connections. Try temporarily disabling your firewall or antivirus program and see if that fixes the problem.
Must Read
1. Check your VPN client settings
If you’re using a VPN client to connect to your Windows VPN server, make sure that the client’s settings are correct. In particular, check the client’s IP address, subnet mask, and gateway settings.
2. Check your VPN server settings
If you’re using a VPN server to connect to your Windows VPN client, make sure that the server’s settings are correct. In particular, check the server’s IP address, subnet mask, and gateway settings.
3. Make sure that your VPN client and server are using the same protocol
If your VPN client and server are using different protocols (e.g., PPTP vs. L2TP/IPsec), they won’t be able to communicate with each other. Make sure that both the client and the server are using the same protocol.
4. Check your firewall settings
If you have a firewall enabled, make sure that it’s configured to allow VPN traffic. In particular, check the firewall’s settings for the VPN protocol that you’re using (e.g., UDP port 500 for IPsec).
5. Restart your VPN client and server
If all else fails, try restarting both your VPN client and server. This will usually fix any connection problems.
Conclusion
Thanks for reading our blog post on how to fix Windows VPN connecting only after a restart. We hope that you found the information in this post helpful and that you were able to successfully fix your VPN issue. If you have any further questions or comments, please feel free to leave them in the comments section below.
